Wrapper/Shrinker kombi
Application:
For pallet loads protection by stretch film or shrink hoods.
Load dimensions (incl. pallet):
height: 2000 mm
width: 800 lub 1000 mm
length: 1200 mm
weight: 1500 kg*
GP Combi dimensions:
height: 3200 mm
length: 2765 mm
width: 1650 mm
weight: 630 kg
Wrapping:
- two stage film stretch system: a) pre-stretch, one-motor 220% or 180%, b) between carriage and load with adjustable tension,
- automatic load height detection,
- easy and safe film installing systemi,
- safety switch under carriage,
- pallet wrapping from turntable level,
- turntable soft start and stop,
- turntable positioning,
- control system with work diagnostic;
Wrapping parameters:
- film stretch adjustment between carriage and load from 6 ÷ 10 kG,
- number of bottom/top layers (1 ÷ 8),
- single wrapping (down-up),
- double wrapping (down-up-down),
- wrapping with or without stop (in order to load top surface covering),
- turntable rotational speed flexible adjustment from 2 ÷ 15 rotates/min,
- film overlap: carriage continuous operating: 120 mm; step operating: 180 or 240 mm,
- top overlap 0 ÷ 240 mm,
- two functions suggested by Customer, e.g.: additional middle wraps, wrapping from the top;
Shrinking:
- carriage with two gas burners,
- flame control system,
- automatic burners safe turning off system when gas pressure is lower than 0,09 MPa,
- distance from burners to load adjustment,
- carriage step work with adjustable range of the step,
- automatic load height detection,
- safety switch on carriage,
- possibility of hood turning up,
- turntable soft start and stop,
- turntable positioning,
- control system with operate diagnostic;
Shrinking parameters:
- turntable adjustment in position 0 i 90°,
- shrinking mode choice: from the bottom or from the top,
- adjustable turntable rotational speed when burners are in bottom, middle and upper position,
- number of top and bottom wraps adjustment,
- table rotational speed flexible adjustment from 2÷ 8 rotates/min,
- burners operating over load in adjustable range of 0 ÷ 350 mm,
- burners turn on time adjustment before turntable starting,
- additional manual mode: a) burners igniting, b) table rotating move, c) carriage up move, d) carriage down move;
GP Combi technical data:
| Wrapping capacity |
30 pallets/h |
| Shrinking capacity |
25 pallets/h |
| Power supply |
3 x 400 V, AC / 50 Hz, N, PE |
| Power consumption |
1,3 kW |
| Table height from basis |
67 mm |
| Driver |
Siemens S-200 |
| Igniting and flame control system |
Krom – Schroder |
| Burners power |
2 x 30 kW |
| Minimal gas pressure |
0,12 MPa |
| Maximal gas pressure |
0,45 MPa |
| Optimal gas pressure |
0,16 ÷ 0,20 MPa |
| Air consumption |
86 m3/h (0,16 MPa) |
| Gas consumption |
a) propane-butane – 0,16 MPa (burners continuous operating) 5,25 kg/h,
b) natural GZ50 (burners continuous operating) 6 m3/h |
| Work temperature |
0 ÷ 40oC |
| Powder coating RAL |
5002 – sapphire-blue, 2004 – orange |
| According to the CE safety norms |
|
Options and additional equipment :
